Features: High melting point, good strength in high temperature , wear and corrosion resistance, high thermal conductivity, small coefficient of thermal expansion, good hardenability
Classification: Sintering molding (application to powder metallurgy technology), stamping molding, spinning
Tungsten carbide has a series of excellent properties such as high hardness, wear resistance, strength and toughness, heat resistance and corrosion resistance.
Tungsten carbide is widely used as tool material, such as turning tool, milling cutter, planer knife, drill, boring cutter, etc. Tungsten carbide is also used for cutting cast iron, non-ferrous metal, plastics, chemical fiber, graphite, glass, stone and ordinary steel. What’s more it can be used for cutting refractory steel, stainless steel, high manganese steel, tool steel and other difficult materials.
Grade: YG6. YG6x. YG8. YG13.YG20. YN6. YN9. YN12. YT5. YT15
|
Grade |
ISO Code |
Density g\cm3 |
Bending strength MPA |
Solidity HRA |
A pplication |
|
YT15 YT05 |
P10 |
11.3 12.6 |
1300 1260 |
91 92.5 |
Suitable for finishing and semi-finishing of steel and cast steel, medium feed rate and high cutting speed should be adopted. |
|
YC201 YT14 YS25 |
P20 |
11.79 11.4 13.0 |
1400 1400 1780 |
91.8 90.5 90.5 |
Suitable for finishing and semi-finishing of steel and cast steel, suitable for medium feed rate,Ys25 for Milling of Steel and cast Steel. |
|
YT5 |
P30 |
12.8 |
1570 |
89.5 |
Suitable for heavy cutting of steel and cast steel |
|
YC45 |
P40 |
12.75 |
2250 |
90 |
Suitable for Gravity cutting of cast steel,can be used for large cutting parameters, but also for end milling. |
|
YS8 |
M05 |
13.9 |
1720 |
92.5 |
It is suitable for finishing of iron base, nickel base superalloy and degree strength steel.It is also suitable for finishing cold hard cast iron, heat resistant stainless steel, high manganese steel and quenched steel. |
|
YW3 YW1 |
M10 |
12.9 13 |
1390 1290 |
92 91.5 |
Suitable for finishing and semi-finishing of stainless steel and common alloy steel. |
|
YN201 YS2T YW2 |
M20 |
13.9 14.4 12.9 |
1600 1960 1460 |
93.0 91.5 90.5 |
Suitable for semi-finishing of stainless steel and lean alloy steel. |
|
YM30 |
M30 |
14.5 |
2000 |
91.5 |
Suitable for rough working of heat resistant alloy. |
|
YG3X YG3 |
K05 |
15.1 15.0 |
1300 1300 |
91.5 90.5 |
Suitable for finishing cast iron and nonferrous metals. |
|
YM201 YG6X |
K10 |
13.9 14.8 |
1600 1560 |
93.0 91.0 |
Suitable for finishing and semi-finishing of cast iron and non-ferrous metals. |
|
YD201 YG6 YG8 |
K20 |
14.89 14.9 14.6 |
1800 1670 1840 |
91.0 89.5 89 |
Suitable for semi-finishing and rough machining of cast iron and light alloy, and milling of cast iron and low alloy steel. |
Next ：Tungsten needle holder
Prev ：Tungsten Wire
Add to Inquiry
Manager@MetalsExporter.com
Your Inquiry List
